Heavy equipment · industrial

Equipment & machinery hauling on a 40 ft gooseneck

Compact construction equipment, generators, shop machinery and industrial parts, loaded and chained to spec and run direct from your yard or job site. When a lowboy is overkill and a rental trailer isn't enough, a hotshot gets it there today.

Equipment we haul

  • Skid steers and compact track loaders
  • Mini excavators and backhoes
  • Compact tractors and implements
  • Scissor lifts, boom lifts and forklifts
  • Generators, compressors and light towers
  • Electrical cabinets, switchgear and transformers
  • Industrial castings, molds and machine parts
  • Shop machinery on skids or pallets

Weight is the real limit

Length is rarely the problem on a 40 ft deck. Weight is. We can typically carry up to roughly 15,000–16,000 lbs, which covers most skid steers, track loaders, mini excavators, lifts and generators. A full-size dozer or excavator is usually a job for a lowboy, and we'll tell you so rather than overload a truck.

Give us the make, model and any attachments when you call. With the operating weight in hand, we can confirm in a minute whether it's a hotshot load.

Secured to spec

Tracked and wheeled machines are chained at the manufacturer's tie-down points with buckets and booms lowered. Crated and skidded freight is blocked and strapped, and anything that shouldn't get wet is tarped. If your equipment has its own shipping instructions, send them and we'll follow them.

We don't carry a forklift, so crated or skidded freight needs a forklift or crane at both ends. Self-propelled equipment drives on.

Job sites, rental yards and plants

Most equipment loads run between job sites, rental yards, dealers and manufacturing plants. Tell us about gate times, site contacts and any PPE or check-in requirements and we'll show up ready.

Typical equipment runs from DFW

RunDistanceDrive time
Austin~195 mi3–4 hrs, same day
Houston~240 mi4–5 hrs, same day
San Antonio~275 mi4.5–5 hrs, same day
Midland–Odessa~330 mi5–6 hrs, same day
Oklahoma City~205 mi3–4 hrs, same day
Denver~790 mi~12 hrs, next day

Approximate road miles and driving time from the pickup city. Actual timing depends on pickup time, loading, traffic, weather and federal hours-of-service rules; we confirm a window when we quote.

Example loads

Off the deck.

Large red and tan industrial castings chained and strapped on a gooseneck flatbed deck
Industrial castings, strapped and blocked
High-voltage electrical cabinet and plastic bulk bins on the flatbed, black Ram 3500 dually behind
Electrical cabinet and bulk bins
Ram 3500 dually and PJ gooseneck flatbed loaded with an electrical cabinet
Loaded and rolling at dusk

Questions

Before you call.

Can you haul a mini excavator or skid steer?

Usually, yes. Most compact excavators, skid steers and track loaders are well inside what a hotshot gooseneck carries. Send us the model and attachments and we'll confirm.

What about a bulldozer?

Small dozers may fit depending on operating weight; full-size dozers generally need a lowboy. Call with the model and we'll give you a straight answer.

Do I need to load the equipment?

Self-propelled equipment can drive on. Anything on skids or crates needs a forklift, crane or loader at pickup and delivery. Let us know what's on site when you book.

Book it

Tell us what, where
and when.

Call with pickup, drop-off, size and weight and you'll get a flat rate and a pickup window. Or send the quote form and we'll call you back.